12. Maintenance and upkeep
155
Changing the rear lamps
Releasing the rear lamp from the sealing
• Release the rear lamp by carefully applying a plastic wedge beneath
the outer edge of the lamp
(Fig. 1)
.
• Before lifting the lamp out of the sealing, use one hand to hold the inner
edge of the lamp in place
(Fig. 2)
. When releasing the lamp, ensure
that it does not shift or is wedged towards the centre of the vehicle.
• Release the lamp slowly and evenly from the sealing
• The sockets of the light bulbs are marked with arrows; unscrew
them as described on the bulb. Replace the defect bulb and then
screw the socket back into the rear lamp retainer.
Inserting the rear lamp in the sealing
• Place the rear lamp back in the sealing by carefully pushing the rear
light into the inner corner and pressing it lightly into place.
• Then press the outer edge into the sealing, whereby the inner corner
of the lamp must not be shifted.
• Check that the lamp is fully locked into place and
fits smoothly.
•
Fi
nally, do a visual and a functional check of the rear lights.
j
Rear light (LED)
k
Fog tail light (light bulb)
l
LED/dynamic indicator (LED)
*
m
Reversing light (light bulb)
n
Indicator (light bulb)
o
Brake light (light bulb)
The LED components in the rear light cannot be chan
-
ged separately. In case of defects, the entire rear lamp
must be exchanged.
Multifunctional light in Prestige model
Fig. 1
Fig. 2
Reverse side of rear light
Marking on the lamp
Never mix up the predefined positions of the lamps on
the rear lamp and always ensure that they are screwed
tightly into place.
6
5
4
2
3
1
Take care when changing the bulbs so as not to damage
them.
