5. Exterior structure
46
5.7 Roof mounted awning
*
Appropriate adapters and fitting components are available for subse-
quent assembly of roof awnings. Please speak to your HOBBY dealer.
The roof awning should always be assembled by an authorised
specialist.
The maximum permissible total width and total height may not be
exceeded by installing an awning.
If the rear-mounted bicycle carrier is not required, it must be folded up
and secured. To do this, use the clip
j
and the separate fastenings in-
cluded in the accessory kit.
When driving with bicycles, the bicycle carrier must be unfolded and
the straps
k
must be firmly lashed. The front and back wheels of each
bicycle must be firmly lashed using the straps
k
. The fastenings inclu-
ded in the accessory kit are used for the frame.
open
closed
The maximum permissible loading capacity for the rear
bicycle carrier is 40 kg.
2
2
1
Mounting the roof awning (sectional view)
Roof awning
• An awning offers protection from the sun, not against the
elements.
• Do not place people or obstacles in the extension/retrac-
tion area of the awning.
• The awning winding mechanism is fitted with a mecha-
nical block control to limit the extent to which it can be
extended. Never attempt to exceed the block control by
force.
• Always support the awning with the integrated support
legs when extended.
• The awning must always be completely retracted and
secured before driving.
Extending
• Insert the hook on the winding handle into the slot
j
on the win-
ding mechanism.
• Hold the handle with one hand on the upper twist grip and the
other on the lower twist grip. During the operating procedure
gently pull the handle towards you and hold it as vertically in the
slot
j
as possible.
• Turn the winding handle clockwise until the awning has been
rolled out about 1 m.
• Unfold the adjustable support legs on the inside of the drop tube
and use them to support the awning.
• Insert the fastening hook.
• Only then should you roll out the awning to the desired position.
• Remove the winding handle.
• Then, to stabilise the awning, fold out and fasten the supporting
arms which are also located on the inner side of the front profile.
Extending and retracting the awning
1