21
HATCH & CANOPY
1.
Gather the following items
(1) Front windshield
(2) Side window sets
(1) Top hatch
(1) Top hatch tinted cover
(3) #4 x 1/2” screws
2.
Fit the front windshield so it has about 1/4”
overlap all around and flush with the front of
the wing rib.
Apply a small bead of canopy glue around the
inside edge and use masking tape to hold in
place till the glue dries.
3.
Fit the side windows in from the inside. Some
trimming of the flanges may be necessary to
allow the glass to fit all the way into the hole
and flush with the out side surface.
Apply canopy glue to all the flanges and insert
into place. Use masking tape on the outside to
hold in place till the glue dries.
4.
Apply a bead of canopy glue around the inside
of the top hatch cover and fit in place from the
inside.
5.
Secure the top hatch with the three #4 x 1/2”
screws.
