16
1
.
Collect the following items:
(1) Fuel tank
(1) clunk
(1) cap assembly
(3) aluminum tubes
(1) fuel pickup line
(1) plywood fuel tank mount
(2) velcro straps
(1) #4 x 1/2” screw
2.
Assemble the cap with the vent line bent to fit
to the top of the tank and the clunk where it is
1/4” off the bottom of the tank when held ver-
tical.
It is a good idea to use cable ties on the fuel
lines to prevent them from coming off.(cable
ties not included).
FUEL TANK
3.
Velcro the tank to the plywood mount with the
tabs forward.
screw
4.
Fit the tank into the nose and the cutout in the
rear. Retain with the #4 screw.
5.
Fit fuel lines in place thru the hole in the fire-
wall.
