22
Balancing
Your model should balance between 4-1/2” and 5-1/4” behind the leading edge of the
wing.
Good Luck and I hope you enjoy flying the
106” Husky
.
Control Throws
RECEIVER, BATTERY & SWITCH
1.
A mount for the receiver is supplied just in
front of the servos
Use foam under the receiver and rubber
bands to hold it in place.
2.
The area just under the front window is wood
to provide a place to mount the switch. It can
be mounted on either side to keep it away
from the exhaust.
3.
The batteries can be placed between the tank
and receiver or wherever they are needed to
balance the model.
receiver mount
rubber
band
hold
downs
switch
Ailerons Low Rate 3/4” Both Directions
High Rate 1-1/2” Both Directions
Elevators Low Rate 1” Both Directions
High Rate 2” Both Directions
Rudder Low Rate 1-1/2” Both Directions
High Rate 2-1/2” Both Directions
