17
STEP 2
1. Slide the Bottom Cover Support(#16), the Weight Buffer(#61), the Weight Stack and the Top Cover Support(#17) through
the Guide Rods(#5) in turn.
Note: Carefully slide the Weight Plates(#60) one by one onto the guide rods, do not lift more then you can control safely.
2. Set the Weight Bushing(#62) onto the Weight Selector Bar(#64) and attach it at the first hole of the Weight Selector
Bar(#64) using the Weight Pin(#63). Insert the Bar(#64) into the hole of Weight Plates(#60). Slide the Top Weight
Plate(#59) onto the Weight Stack. Set the Weight Washer(#65) onto the socket of Top Weight Plate(#59).
3. Insert the
φ60 Round Plug(#53) into the part(#2). Attach the part(#2) to the part(#3) using the Back Plate(#10) and
(2)M10*80 Hex Bolts(#84).
4. Maneuver each of the Guide Rods(#5) into the holes of part(#2), and then attach the part(#2) to the Guide Rods(#5) using
(2)M10*25 Hex Bolts(#81).
