HMS ATLAS TYTAN 10, Manual Instruction

Page: 25 / 58

25
STEP 5
1. Insert the End Cap(#56) to the part(#9).
2.
Attach the part(#9) to the part(#3) using (2)M10*90 Hex Bolts(#95), (4)φ10 Washers(#108) and (2)M10 Nylon Lock
Nuts(#101).
3. Insert the 45*45 Plug(#63) to the part(#15).
4. Set the Comfort Grip(#75) to the Pec Handler(#26).
5. Attach the part(#26) into the part(#15) using (1)Tab Washer(#51), (1) Ornamental Cap(#50) and (1)M8*20 Socket
CTSK Bolt(#99).
6. Insert the
part(#15) through the hole of part(#33), attach the part(#15) to the part(#9) using (1)φ16 Washer(#110),
(1)M16 Nylon Lock Nut(#103) and (1)M16 Nut Cap(#79).
7. Screw the Pop-Pin(#35) to the part(#15).
8. Assemble the other part(#16, #34) using same method.