HMS ATLAS TYTAN 10, Manual Instruction

Page: 28 / 58

28
1. Insert the 50*50 Plug(#64) and the Buffer(#73) to the part(#8).
2.
Attach the part(#8) to the part(#1) using (1)M12*85 Hex Bolt(#97), (2)φ12 Washers(#109) , (1)M12 Nylon Lock
Nut(#102) and (2)M12 Nut Caps(#78).
3. Insert the Handle(#12) to the hole of part(#10).
4. Set the Comfort Grip(#75) to the Handle(#12).
5.
Attach the part(#10) to the part(#8) using the φ10*60 L-Pin(#71).
STEP 9
1.
Insert theφ25 Plug(#59) into the Foam Roller Tube(#53).
2. Insert the tube through the
hole, and then slide theφ80*160 Foam Roller(#83) onto it, as shown in figure.
3.
Attach the Arm Pad(#49) to the part(#13) using (4)M6*20 Hex Bolts(#85) and (4)φ6 Big Washers(#104).
4. Adjust the height of the part(#13) position and screw the Locking-Pin(#67).
Step 10
4. Separately attach the Backrest Pad(#10,#47) to the part(#3) using (2)M8*90 Hex Bolts(#88)
and (2)φ8
Washers(#107).
5. Attach the Pec Backrest Pad(#48) to the part(#31, #32) using (4)M6*55 Hex Bolts(#86)
and (4)φ6 Big
Washers(#104).
6. Attach the Seat Pad(#46) to the part(#20) using (4)M6*55 Hex Bolts(#86)
and (4)φ6 Big Washers(#104).