HMS ATLAS TYTAN 10, Manual Instruction

Page: 26 / 58

26
STEP 6
1. Insert the Sleeve(#58) to the part(#18).
2. Insert the part(#18) to the part(#11).
3. Screw the Locking-Pin(#67) to the part(#18).
4.
Insert the Sleeve(#57) and φ25 End Cap(#54) to the part(#11).
5. Attach the part(#19) to the part(#11) using (4)M10*75 Hex Bo
lts(#94), (8)φ10 Washers(#108) and (4)M10 Nylon
Lock Nuts(#101).
6. Attach the part(#11) to the part(#3) using (2)M10*75 Hex Bolts(#94), (1)M10*70 Hex Bolt(#93),(6
)φ10
Washers(#108) and (3)M10 Nylon Lock Nuts(#101).
STEP 7
1. Insert the 20*40 Plug(#61) into the end of part(#20, #31, #32).
2.
Attach the part(#25) to the part(#18) using (1)M10*75 Hex Bolt(#94), (2)φ10 Washers(#108) , (1)M10 Nylon Lock
Nut(#101).
3.
Attach the part(#20, #31, #32) to the part(#11) using (1)M12*150 Hex Bolt(#98), (2)φ12 Washers(#109) and (1)M10
Nylon Lock Nut(#102).
4.
Attach the part(#31, #32) to the part(#25) using (1)M12*150 Hex Bolt(#98), (2)φ12 Washers(#109) and (1)M10
Nylon Lock Nut(#102).
5.
Adjust the angle of the part(#20) position and insert the φ10*80 L-Pin(#72).