HMS ATLAS TYTAN 10, Manual Instruction

Page: 24 / 58

24
1. Secure the Bottom Cover Support(#112) and the Weight Buffer(#43) to the Guide Rods(#7).
2. Carefully slide the Weight Stack(#37) through the Guide Rods(#7) one by one. Set the Weight Bushing(#38) onto
the Weight Selector Bar(#41) and attach it at the first hole of the Weight Selector Bar(#41) using the Weight
Pin(#39). Insert the Bar(#41) into the hole of Weight Stack(#37). Slide the Top Weight Plate(#36) onto the Weight
Stack(#37). Set the Weight Washer(#40) to the Top Weight Plate(#36). Insert the φ10*120 L-Pin(#42) into the
Weight Selector Bar(#41).
STEP 4
1. Insert the 50*70 Plug(#65) to the part(#6).
2. Insert the 50*50 Plug(#64) to the part(#21).
3. Attach the part(#6) to the part(#3) using (2)M10*75 Hex Bolts(#94)
, (4)φ10 Washers(#108) and (2)M10 Nylon Lock
Nuts(#101).
4.
Attach the part(#6) to the part(#2) using (2)M10*75 Hex Bolts(#94), (3)φ10 Washers(#108) and (1)M10 Nylon Lock
Nut(#101).
5. Place each of the Guide Rod(#7) onto the hole of the part(#21), then attach the part(#113, #21) to the part(#7)
using (2)M10*25 Hex Bolts(#90) and (4)φ10 Washers(#108).
6. Attach the part(#21) to the part(#6) using (2)M10*70 Hex B
olts(#93), (4)φ10 Washers(#108) and (2)M10 Nylon Lock
Nuts(#101).