5999.505-01C 12.06.2007 WM
2
6
3.2.1
Prevention of accidents
While installing and connecting the Collamat 2600 take care that the signal
cables and power cables can't become obstacles. The cables must be placed
and installed according to the national safety requirements. Take care that
the signal cables are not placed beneath power cables.
The power switch and the controll elements must easily be accessible.
3.2.2
Noise suppression
The dispenser C2600 is shielded according to the CE directives. Only cables
which are certificated by HM Collamat AG may be used for connecting the
dispenser to the peripheral units and the mains power.
3.2.3
Stability
If the Collamat 2600 is used on a movable stand, this stand must be capable
to be tilt 10° in each direction. See also following Figure 1:
Figure 1: Stability of the stand
10°
10°
