HM Electronics Collamat 2600, Technical Handbook

Page: 14 / 32

5999.505-01C 12.06.2007 WM
2
14
5.3 Transformer wiring
ATTENTION:
Before opening the Collamat 2600 it must be complettely disconnected
from mains.
The secondary side of the transformer is connected to the terminals X10 ac-
cording to the table below:
The primary side of the transformer is connected to the terminals X6 accord-
ing to the table below:
5.4 Connection of the mains input
ATTENTION:
High voltage. Mains voltage
The powercord must be connected to the terminal X1. To prevent interfe-
rences it must be looped through a ferrite-filter as shown in Figure 10:
Table 1: Transformer connection secondary side
Terminal Colour
X10.1 Green
X10.2 Red
Table 2: Trafoanschluss Primärzeitig
Terminal Colour for 220V Colour for 110V
X6.1 Orange Brown
X6.2 Red + Brown nc
X6.3 Black Red + Black
Figure 11: Mains connection
Brown
Yellow/Green
Blue
Ferrit-Filter
IN
X1