5999.505-01C 12.06.2007 WM
2
8
4
Mechanical adjustments
4.1
Traction unit
4.1.1
Threading the labelweb
Thread the labelweb as shown in figure 3 up to the dispensing edge and draw
it out by approx. 1 m. Detach the labels from the paperweb at the drawn-out
web. Then open the pinchroller by turning the knob (1), place the paperweb
over the dispensing edge and finish threading the paperweb as shown in fig-
ure 3. Close the pinchroller. Adjust the side guides of the paperweb well,
leaving 0.5 mm free space to the paperweb's edge.
4.2
Adjustment of rewinder coupling force
The coupling force of the rewinder is factory-set. Proceed as follows if out of
adjustment: Detach winding spindle (1) after unscrewing the M5-bolt (3).
Screw M8-bolt (2) accordingly:
•
in = harder coupling
•
out = softer coupling
Figure 3: Threading
1
Figure 4: Rewinder coupling
3
2
1