HKS 45003-AK005, Instruction Manual

Page: 12 / 52

Note
・The LCD of the display unit may have a black line. This is caused by static electricity,
and it does not affect the functions or performance of the unit. To remove the line,
wipe the display with an antistatic cloth or a cloth with the antistatic solution.
−11−
２．３．Scramble Boost Activated
２．４． Warning Function Triggered
After the unit beeps, the bar graph
and the SBC indicator will blink.
After the unit beeps, the bar graph and
the WRN indicator will blink.
７． Bar Graph Display
In this display, a bar graph of the following can be shown: manifold pressure, speed,
RPM, throttle percentage opening, set value, or axis number. In the Standard Mode, you
can select between the manifold pressure, speed, RPM, and throttle percentage opening
for real‑time display.
８．
Selection Display
The indicators of A and B show the selected preset boost setting in the Standard Mode.
In the Offset A/B Set Mode, Map Boost A/B Set Mode and Map Offset A/B Set Mode, the
current preset value is shown. The indicator of SPD, REV, and THR show the input signal
currently used for the correction map in the Standard Mode, Map Boost A/B Set Mode and
Map Offset A/B Set Mode. In the Speed Axis Grid Point Set Mode, RPM Axis Grid Point
Mode and Throttle Axis Grid Point Set Mode, each corresponding signal is shown.
２．２．Start‑Up
After the unit beeps once, the
wastegate type appears on the digital
display (S), and the preset boost value
appears on the digital display (L).
Beep
Beeeeeeep....
BeepBeepBeep....
www.R33-GTR.org