HKS 45003-AK005, Instruction Manual

Page: 34 / 52

−33−
The warning function is activated when the manifold pressure goes exceeds the user preset
boost value. The EVC will drop boost to baseline boost or by a user set amount of boost.
(１)While in the Warning Boost Set Mode, press the volume
knob.
・The digital display (S) will illuminated [ ].
・"ＷＲＮ" will be illuminated on the display.
・The EVC will beep and the digital dusplay (L) blinks.
・"ＳＥＴ" will be illuminated on the display.
(２)Turn the volume knob to select the warning boost value.
After value has been selected, press the volume knob.
・The setting range is 0‑250 kPa or 0.0‑36 PSI in
increments of 1kPa or 0.1 PSI respectively.
・The default setting value is 250 kPa or 36.0 PSI.
Note
・The warning function is reset when the manifold pressure drops below 5 kPa.
Note
・While pressing Button①, the Scramble function is activated. However, the Scramble timer
function will not countdown until after the release of the button. When the Scramble time
is set to 0 second, the Scramble function is only active when the button is pressed.
４．４．Warning Boost Set Mode
(２)Turn the volume knob to select the duration of Scramble
Time. After selection is done, press the volume knob.
・The setting range is between 0‑60 seconds in 1 second
increments.
・The default setting is 0 seconds.
Set the amount of boost to drop when the warning function is triggered.
(１)While in the Drop Boost Mode, press the volume knob.
・The digital display (S) will illuminated [ ].
・"ＷＲＮ" will illuminate on the display
・The EVC will beep and the digital display (L) blinks.
・"ＳＥＴ" will illuminate on the display.
４．５．Drop Boost Set Mode
(２)Turn the volume knob to select the value amount of
boost drop. After selections, press volume knob.
・The setting range is 1‑120 kPa or 0.1‑17.0 PSI in
increments of 1kPa or 0.1 PSI respectively
・The default setting is "OFF". (Drops boost to the
baseline boost value)
www.R33-GTR.org