HKS 45003-AK005, Instruction Manual

Page: 42 / 52

(１)Press the volume knob while in the cylinder # set mode.
・The digital display (S) will illuminate [ ].
・The EVC will beep and the digital display (L) blinks.
・"ＳＥＬ" will illuminate on the display.
Set the amount for the number of cylinders of engine. (For use for the RPM signal input)
７．１．Cylinder # Set Mode
CAUTION
●Settings must be done with the engine OFF.
−41−
７．Vehicle Setting Group
For optimum performance of the EVC, select the appropriate selects for the application.
(２)Turn the volume knob to select the number of cylinders.
Press the volume knob after the selection.
・Select from:１・２・３・４・６・８ of cylinders.
・The default setting is "４" for 4 cylinders.
Set the speed pulse for the speed signal input.
７．２．Speed Pulse Set Mode
(１)Press the volume knob while in the speed pulse set
Mode.
・The digital displau (S) will illuminate [ ].
・The EVC will beep and the digital display (L) blinks.
・"ＳＥＬ" will illuminate on the display.
(２)Turn the volume knob to select the speed pulse
setting. Press the volume knob after the selection.
・Select from: ２・４・８・１６ pulses.
・The default setting is "４" pulses.
Note
・For rotary engines, select "４" for ２rotor engines and "６" for ３rotor engines.
Note
・For Nissan Y32 Gloria / Cedric use setting 16, for Y32 Cima use setting 8 and for
all other Nissan vehicles use setting 2. For other JDM vehicles use setting 4.
www.R33-GTR.org