OPERATING THE ENGINE
3-7
M1J1-03-004
Basic Screen
4
T1V5-05-01-170
f
NOTE: When the maintenance information display is
ON with the maintenance setting, the scheduled
maintenance screen for the item whose change
interval has expired displays for three to ten seconds.
Then, the basic screen displays.
7. The basic screen will be displayed on the monitor.
The machine will automatically check if preheating is
required or not. When preheating is required, preheat
display (4) is lit for automatically.
f
NOTE: In case, preheat display (4) does not come ON,
preheating is not required.
8. As soon as preheat display (4) goes OFF, turn key switch
(2) to the START position to rotate the starter.
IMPORTANT: Prevent the starter damage.
Never operate the starter motor for more
than 10 seconds at a time. If the engine fails
to start, return key switch (2) to OFF. Wait
for more than 30 seconds, then try again.
After a false start, do not turn key switch
(2) until the engine stops or starter may be
damaged.
9. Release key switch (2) immediately after the engine has
started. It will return to ON position.
Summary of Contents for ZAXIS 450LC-3
