Hitachi ZAXIS 450LC-3, Operator'S Manual

Page: 22 / 477

SAFETY
S-10
SA-481
SA-490
SA-491
EQUIPMENT OF OPG
•
In case the machine is operated in areas where the
possibility of falling stones or debris exists, equip genuine
Hitachi OPG guard. Contact your nearest Hitachi dealer for
installation method of the OPG guard. Depending on the
specifications applied to your machine, modification of the
machine to meet ROPS standards will be possible.
•
To maintain unimpaired operator protection and
manufacture’s protective structure.
• Damaged ROPS, OPG guard must be replaced, not
repaired or revised.
• Any alternation to the ROPS or OPG guard must be
approved by the manufacturer.
ROPS : Roll Over Protective Structure
OPG : Operator Protective Guard
PROVIDE SIGNALS FOR JOBS INVOLVING
MULTIPLE NUMBERS OF MACHINES
• For jobs involving multiple numbers of machines, provide
signals commonly known by all personnel involved. Also,
appoint a signal person to coordinate the job site. Make sure
that all personnel obey the signal person’s directions.
018-E01A-0481
CONFIRM DIRECTION OF MACHINE TO BE DRIVEN
•
Incorrect travel pedal/lever operation may result in serious
injury death.
• Before driving the machine, confirm the position of the
undercarriage in relation to the operator’s position. If the
travel motors are located in front of the cab, the machine
will move in reverse when travel pedals/levers are
operated to the front.
017-E01A-0491