Hitachi VZ-HD3600A User Manual Download

Page: 2 / 72

Important Information

For Your Safety

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The camera and AC adapter have the
following caution marks.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Identifications of caution marks

This symbol warns the user that

uninsulated voltage within the unit

may have sufficient magnitude to

cause electric shock. Therefore,

it is dangerous to make any kind

of contact with any inside part of

this unit.
This symbol alerts the user that

important literature concerning the

operation and maintenance of this

unit has been included. Therefore,

it should be read carefully to avoid

any problems.

Summary of Contents for VZ-HD3600A









































































Search results

Summary of Contents for VZ-HD3600A

Reviews:

Related manuals for VZ-HD3600A

Brands by name

Popular brands

Hitachi VZ-HD3600A, User Manual

Search results

Summary of Contents for VZ-HD3600A

Reviews:

Related manuals for VZ-HD3600A

Brands by name

Popular brands