Hitachi VZ-HD3600A, User Manual

Page: 48 / 72

48
A
pp
en
di
x
If this Happens Way to Resolve the Problem
Refer to
Page
Im
age
R
el
ated
(Cont.)
HD-SDI output [VZ-HD3650/3700/3780A]
is not output at 1080p/59.94 or 1080p/50.
Change the Video Select switch and try
using a different image output format or
use the DVI-I OUT [VZ-HD3700/3780A].
P. 15
P. 25
Is the input switch of the monitor set
correctly?
Check and make sure the input is set for
the connected DVI-I terminal
[VZ-HD3600/3700/3780A] or HD-SDI
terminal [VZ-HD3650/3700/3780A].
―
The outline of the
subject is colored.
This is not a fault. The area around the
outline of a subject may be colored.
Switching to the Program AE Auto mode
and changing the aperture limit may
improve this.
P. 40
The subject appears
distorted.
This is not a fault. The subject may
appear slightly distorted due to the nature
of the image sensor (CMOS).
―
There are horizontal
stripes on the screen.
This is not a fault. It may appear this way
under artificial lighting.
―
Bright spots appear
on the screen.
This is not a fault. On rare occasions,
bright spots may appear on dark subjects.
―
There is a green
stripe on the right
side of the screen.
A green stripe may appear on the right
side of the screen with some monitors
when using an analog video output
[VZ-HD3600/3700/3780A]. If this
happens, use the monitor’s function for
adjusting the horizontal position to correct
the position of the screen.
―
Subjects end up
looking dark.
When you shoot with a bright object in
the background (such as a window, light,
the sun, etc.), subjects become dark,
so devise a way to shoot so there isn’t
anything bright in the background, or use
backlight compensation.
P. 34