Hitachi VZ-HD3600A User Manual Download

Page: 54 / 72

Software License Information

Relevant Software License Agreement

Linux Kernel
busybox
libgcc
lzo
U-Boot

GNU GENERAL PUBLIC LICENSE Version 2

glibc

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1

The software incorporated into this product is composed of multiple

independent software modules and the copyright for each of the individual

software modules belongs to Hitachi Industry & Control Solutions, Ltd. or a

third party.

These products incorporate software modules that were developed and/or

created by Hitachi Industry & Control Solutions, Ltd. itself, and the property

rights and/or intellectual property rights to this software and related

documentation belong to Hitachi Industry & Control Solutions, Ltd. These

rights are protected by the Copyright Act and other laws.

Furthermore, this product uses software modules licensed as free software,

based on the GNU GENERAL PUBLIC LICENSE Version 2 and/or GNU

LESSER GENERAL PUBLIC LICENSE Version 2.1 (hereafter referred to as

"the Software License Agreement"), established by the Free Software

Foundation, Inc. of the U.S.

Refer to the following table for information on subject software modules. If

you have questions about subject software modules, please contact the store

where you purchased it.

For details about said software modules, such as conditions of use, please

read the software license agreement of each software as listed later (As these

are stipulated by third parties other than Hitachi Industry & Control Solutions,

Ltd., we are including the original document (English).).

Parties other than Hitachi Industry & Control Solutions, Ltd. have copyrights

and/or other rights to said software modules, and the software is licensed free

of charge, so it is provided as is and we make no guarantees whatsoever,

within the range of applicable laws (neither explicitly or implicitly). Further, we

shall bear no responsibility for any damages (including loss of data,

compromised accuracy, incompatibility with the interface of other software,

etc.) or expenses whatsoever that may arise due to the software modules

and/or the use thereof, within the range of applicable laws.

Subject

Software Modules

Summary of Contents for VZ-HD3600A









































































Search results

Summary of Contents for VZ-HD3600A

Reviews:

Related manuals for VZ-HD3600A

Brands by name

Popular brands

Hitachi VZ-HD3600A, User Manual

Search results

Summary of Contents for VZ-HD3600A

Reviews:

Related manuals for VZ-HD3600A

Brands by name

Popular brands