Hitachi VZ-HD3600A, User Manual

Page: 25 / 72

24 25
In
stal
lat
ion
a
nd
C
on
ne
ction

Connecting to an
External Device with
an RS-232C
l
Use an RS-232C to connect
the camera for control via an
external device.
1 Connect as follows with an
RS-232C cable.
RS-232C cable*
To RS-232C IN terminal
To external device
* See P. 65 for terminal specifi cations.
2 Select SYSTEM SELECT
SWITCH 1 (serial
communication baud rate) for
the connected external device
and set SYSTEM SELECT
SWTICH 3 (RS-232C/RS-422)
to RS-232C.
See P. 15 for how to make
settings.

Connecting Multiple
Cameras to an
External Device
l
To control more than one
camera with an external
device via RS-232C or
RS-422 cables, connect them
in a daisy chain.
1 Using RS-232C or RS-422
cables, make the connections
as shown in the fi gures on P. 26.
2 To make connections with
RS-422 cables, use the included
RS-422 terminal block
connector and make connection
cables. When making cables,
refer to the wiring diagrams on
P. 63 for pin layout and P. 64 for
the wiring diagram for RS-422
cables.
Also, refer to P. 65 for how to
use RS-422 terminal block
connectors.
3 Select SYSTEM SELECT
SWITCH 1 (serial
communication baud rate) for
the connected external device
and select SYSTEM SELECT
SWTICH 3 (RS-232C/RS-422).
See P. 16 for how to make
settings.