manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

62 

Chapter 2  Overview of CCI Operations 

HORCM_LDEV

. The HORCM_LDEV parameter is used for specifying stable LDEV# and Serial# 

as the physical volumes corresponding to the paired logical volume names. Each group name 
is unique and typically has a name fitting its use (e.g., database data, Redo log file, UNIX 
file). The group and paired logical volume names described in this item must also be known 
to the remote server. 

(a)  dev_group: This parameter is the same as HORCM_DEV parameter.  

(b)  dev_name: This parameter is the same as HORCM_DEV parameter.  

(c)  MU#: This parameter is the same as HORCM_DEV parameter.  

(d)  Serial#: This parameter is used to describe the Serial number of RAID box. 

(e)  CU:LDEV(LDEV#): This parameter is used to describe the LDEV number in the RAID 

storage system and supports three types format as LDEV#. 

 

HORCM_LDEV 

#dev_group   dev_name    Serial#      CU:LDEV(LDEV#)   MU# 
   oradb     dev1        30095        02:40              0 
   oradb     dev2        30095        02:41              0 

–

 

Specifying “CU:LDEV” in hex used by SVP or Web console 
Example for LDEV# 260 
01: 04 

–

 

Specifying “LDEV” in decimal used by inqraid command of RAID Manager 
Example for LDEV# 260 
260 

–

 

Specifying “LDEV” in hex used by inqraid command of RAID Manager 
Example for LDEV# 260 
0x104 

Note:

 HORCM_LDEV format can be used for Lightning 9900V and later. LDEV# will be 

converted to “Port#, Targ#, Lun#” mapping to this LDEV internally, because the RAID storage 
system needs to specify “Port#, Targ#, Lun#” for the target device. This feature is 
TagmaStore USP/NSC and 9900V microcode dependent; if HORCM fails to start, use 
HORCM_DEV. 

HORCM_INSTP.

 This parameter is used to specify “pathID” for TrueCopy link as well as 

“HORCM_INST”. 

 

HORCM_INSTP 
dev_group        ip_address      service   pathID 
VG01             HSTA            horcm     1 
VG02             HSTA            horcm     2 

Note:

 PathID can be specified for TrueCopy on USP V/VM and USP/NSC. UR cannot be 

specified. PathID is used for the paircreate command and pairresync –swapp[s], so it must be 
specified at the PVOL and SVOL sites. If PathID is not specified, it will be used as CU free. 

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

Western Digital WDBAAE3200ASL - My Passport Studio Specifications preview
WDBAAE3200ASL - My Passport Studio
Brand: Western Digital Pages: 2
Dorel Asia DA7382 Instruction Booklet preview
DA7382
Brand: Dorel Asia Pages: 15
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
ABSCO SHEDS CYCHK Assembly & Instruction Manual preview
CYCHK
Brand: ABSCO SHEDS Pages: 25
CASARIA 108120 Instructions Manual preview
108120
Brand: CASARIA Pages: 13
G-Technology G-Drive ev SSD Product Manual preview
G-Drive ev SSD
Brand: G-Technology Pages: 33
LaCie 301894 User Manual preview
301894
Brand: LaCie Pages: 22
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56
NewerTech miniStack Assembly Manual & User Manual preview
miniStack
Brand: NewerTech Pages: 12
Philips Swarovski LOCK IN FM01SW60/27 Specifications preview
Swarovski LOCK IN FM01SW60/27
Brand: Philips Pages: 2
Philips Swarovski FM01SW21/27 Specifications preview
Swarovski FM01SW21/27
Brand: Philips Pages: 2
Philips SPE9025CC Specification Sheet preview
SPE9025CC
Brand: Philips Pages: 2
Philips Swarovski FM01SW21/00 Specifications preview
Swarovski FM01SW21/00
Brand: Philips Pages: 2
Philips SPE9000CC Series Specifications preview
SPE9000CC Series
Brand: Philips Pages: 2
Philips SPE9020CC Specifications preview
SPE9020CC
Brand: Philips Pages: 2
Philips SPE9010 User Manual preview
SPE9010
Brand: Philips Pages: 23
NetApp DS4243 Installation And Setup preview
DS4243
Brand: NetApp Pages: 2
Glasdon FUSION LITTER BIN Instruction Leaflet preview
FUSION LITTER BIN
Brand: Glasdon Pages: 4

Brands by name

Popular brands

Load more brands