manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

250 

Chapter 4  Performing CCI Operations 

Parameter Value 

Options 

-h:

 

Displays Help/Usage and version information.  

-q:

 

Terminates the interactive mode and exits the command.  

-z or -zx (OpenVMS cannot use the -zx option):

 

Makes the raidvchkscan command enter the interactive 

mode. The -zx option guards performing of the HORCM in the interactive mode. When this option detects 

a HORCM shut down, interactive mode terminates. 
-I[H][M][instance#] or -I[TC][SI][instance#] Specifies the command as [HORC]/[HOMRCF], and used 

for specifying instance# of HORCM. 
-g <group>:

 

Specifies a group name written in the configuration definition file.  

-p <port> [hgrp]:

 

Specifies the port ID of the port to be scanned. Valid ports are CL1-A to CL1-R and 

CL2-A to CL2-R (excluding CL1-I, CL1-O, CL2-I, CL2-O). In addition: 

For USP V/VM: CL3-a to CL3-r, or CLG-a to CLG-r for the expanded port 

For USP: CL3-a to CL3-r, or CLG-a to CLG-r for the expanded port 

For NSC: CL3-a to CL3-h, or CL8-a to CL8-h for the expanded port. 

For 9900V: CL3-a to CL3-r, or CL4-a to CL4-r for the expanded port 
The port is not case sensitive (e.g. CL1-A= cl1-a= CL1-a= cl1-A, CL3-a= CL3-A= cl3-a= cl3-A). This 

option must be specified if “-find” or “-pd <raw_device>“option will not be specified. 

[hgrp] is specified to display only the LDEVs mapped to a host group on a port (9900V and later). 

-pd[g] <raw_device>: Specifies the raw device name. This option finds Seq# and port_name of the 

storage system to which the specified device can be connected, and scans the port of the storage system 

which corresponds with the unit ID that searches the unit ID from Seq#. This option must be specified if 

the “-find” option will not be specified. If this option is specified, the following -s <Seq#> option is invalid. 
    -pdg (9900V and later): Shows a LUN on the host view by finding a host group (9900V and later). 
-s <Seq#>:

 

Used to specify the Seq# (serial#) of the storage system when this option cannot specify the 

unit ID which is contained for “-p <port>“ option. This option scans the port specified by “-p <port>“ option 

of the storage system which corresponds with the unit ID that searches the unit ID from Seq#. If this 

option is specified, then the unit ID which is contained in “-p <port>“ option is invalid. 
-t <target>:

 

Specifies a target ID (0 to 15) of the specified port. If this option is not specified, the 

command applies to all target IDs. 
-l <lun>:

 

Specifies a LUN (0 to 7) of the specified target ID. If this option is not specified, the command 

applies to all LUNs. If this option is specified, the TID must also be specified. 
-fx:

 

Displays the LDEV/STLBA/ENLBA number in hexadecimal notation. 

-v [op]: Specifies the following operation that displays each parameter for validation checking: 

cflag: Displays all flags for checking regarding data block validation for target vols (see Figure 4.40). 
offset: Displays the range setting for data block size of Oracle I/O and a region on a target volume for 

validation checking (see Figure 4.41). 

 
errcnt: Displays the statistical information counted as an error for each checking on the target 

volumes (see Figure 4.42). Each statistical information counted as an error will be cleared when the 

individual flag for validation checking is disabled. 
gflag: Displays the parameter for guarding on the specified target volumes (see Figure 4.43). 
pool: This option displays the pool capacity and the usable capacity for the pool ID to which the LDEV 

belongs. This will be needed to help the decision whether the restore operation is possible or not, 

because the pool capacity is consumed by the restore operation of the SnapShot (see Figure 4.44). 
aou: Displays the LUN capacity and usage rate for only HDP volume mapped to the specified port,  

and displays the ID of the pool to which LDEV belongs (see Figure 4.45). 

 

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
Tabernus Enterprise Erase E2400 User Manual preview
Enterprise Erase E2400
Brand: Tabernus Pages: 24
garofalo HIMALAYA 100.S/2/CC User Manual preview
HIMALAYA 100.S/2/CC
Brand: garofalo Pages: 12
IBM Tape Library Magstar 3494 Operator'S Manual preview
Tape Library Magstar 3494
Brand: IBM Pages: 378
SanDisk 175972 User Manual preview
175972
Brand: SanDisk Pages: 2
QNAP TVS-882BR User Manual preview
TVS-882BR
Brand: QNAP Pages: 74
StorCentric NESAN E48X Installation Manual preview
NESAN E48X
Brand: StorCentric Pages: 53
Yotta SolarLEAF SL-1000 User Manual preview
SolarLEAF SL-1000
Brand: Yotta Pages: 13
Elektra Beckum Universal Working Table WT 840 (German) Montageanleitung preview
Universal Working Table WT 840
Brand: Elektra Beckum Pages: 4
NORBAIN VAIDe User Manual preview
VAIDe
Brand: NORBAIN Pages: 11
Rocstor ROCPORT ID3 Quick Installation Manual preview
ROCPORT ID3
Brand: Rocstor Pages: 4
Fujitsu MHV2040AS Specification preview
MHV2040AS
Brand: Fujitsu Pages: 40
Fujitsu MHW2060BK - Mobile 60 GB Hard Drive Installation Manual preview
MHW2060BK - Mobile 60 GB Hard Drive
Brand: Fujitsu Pages: 12
Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Installation Manual preview
MHX2300BT - Mobile 300 GB Hard Drive
Brand: Fujitsu Pages: 12
Fujitsu MHW2040AT - Mobile 40 GB Hard Drive Product Manual preview
MHW2040AT - Mobile 40 GB Hard Drive
Brand: Fujitsu Pages: 278
Fujitsu MHX2250BT Product Manual preview
MHX2250BT
Brand: Fujitsu Pages: 296
Fujitsu MHV2160BT Product Manual preview
MHV2160BT
Brand: Fujitsu Pages: 292
Fujitsu MHV2040AT - Hard Drive - 40 GB Product Manual preview
MHV2040AT - Hard Drive - 40 GB
Brand: Fujitsu Pages: 280

Brands by name

Popular brands

Load more brands