manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

48 

Chapter 2  Overview of CCI Operations 

The four possible CCI instance configurations are: 

„

 

One host connected to one storage system

. Each CCI instance has its own operation 

manager, server software, and scripts and commands, and each CCI instance 
communicates independently with the command device. The RAID storage system 
contains the command device which communicates with the CCI instances as well as the 
primary and secondary volumes of both CCI instances. 

„

 

One host connected to two storage systems

. Each CCI instance has its own operation 

manager, server software, and scripts and commands, and each CCI instance 
communicates independently with the command device. Each RAID storage system has a 
command device which communicates with each CCI instance independently. Each 
storage system contains the primary volumes of its connected CCI instance and the 
secondary volumes of the other CCI instance (located on the same host in this case). 

„

 

Two hosts connected to one storage system

. The CCI instances are connected via the 

LAN so that they can maintain awareness of each other. The RAID storage system 
contains the command device which communicates with both CCI instances and the 
primary and secondary volumes of both CCI instances 

„

 

Two hosts connected to two storage systems

. The CCI instances are connected via the 

LAN so that they can maintain awareness of each other. Each RAID storage system has a 
command device which communicates with each CCI instance independently. Each 
storage system contains the primary volumes of its connected CCI instance and the 
secondary volumes of the other CCI instance (located on a different host in this case). 

2.8.3

 

Host Machines that Can be Paired 

Host machines are combined when a paired logical volume is defined, provided the host 
machines run on the operating system (OS) of the same architecture. This is because the 
host machine may be incapable of recognizing the paired volume of another host, although 
the HORC management of them runs properly.  

As a particular application uses HORC, users sometimes use HORC volume as the retention 
volume for the data backup of the server. In this case, RAID Manager requires that the RAID 
Manager instance corresponds to each OS platform that is located on the secondary site for 
the pair operation of data backup on the primary servers of each OS platform. 

However, it is possible to prepare only one server at a secondary site by supporting RAID 
Manager communications among different OSs (including the converter for “little-endian” vs 
“big-endian”). 

Figure 2.22 represents RAID Manager’s communication among different OSs, and Table 2.9 
shows the supported communication (32-bit, 64-bit, MPE/iX) among different OSs. Please 
note the following terms that are used in the example: 

„

 

RM-H

: RAID Manager instance setting HORCMFCTBL environment variable for HP-UX on 

Windows 

„

 

RM-S

: RAID Manager instance setting HORCMFCTBL environment variable for Solaris on 

Windows 

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

LaCie LaCie Ethernet Big Disk Quick Install Manual preview
LaCie Ethernet Big Disk
Brand: LaCie Pages: 16
LaCie 4BIG QUADRA USB 3.0 User Manual preview
4BIG QUADRA USB 3.0
Brand: LaCie Pages: 41
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie Hard Drive Quick Install Manual preview
Hard Drive
Brand: LaCie Pages: 13
LaCie D2 BLU-RAY XL Manual preview
D2 BLU-RAY XL
Brand: LaCie Pages: 29
LaCie D2 BLU-RAY XL Brochure & Specs preview
D2 BLU-RAY XL
Brand: LaCie Pages: 4
Little Cottage Colonial Pinehurst Assembly & Instruction Manual preview
Colonial Pinehurst
Brand: Little Cottage Pages: 19
Microdia MMCmobile Operating Manual preview
MMCmobile
Brand: Microdia Pages: 1
Qualstar RLS-4470 Technical & Service Manual preview
RLS-4470
Brand: Qualstar Pages: 205
IBM TS7700 Series User Manual preview
TS7700 Series
Brand: IBM Pages: 117
Qsan XEVO Manual preview
XEVO
Brand: Qsan Pages: 28
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
Facom FAS.C8BK Assembly Manual preview
FAS.C8BK
Brand: Facom Pages: 2
Addonics Technologies ST55HPMXU User Manual preview
ST55HPMXU
Brand: Addonics Technologies Pages: 9
kincrome Evolution K7916 Operation Manual preview
Evolution K7916
Brand: kincrome Pages: 2
Belkin F5U100-ORG - USB Busstation Hub User Manual preview
F5U100-ORG - USB Busstation Hub
Brand: Belkin Pages: 12
QNAP TS-h2483XU-RP Series Quick Installation Manual preview
TS-h2483XU-RP Series
Brand: QNAP Pages: 12

Brands by name

Popular brands

Load more brands