manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

188 

Chapter 4  Performing CCI Operations 

Parameter Value 

Options 

-h:

 

Displays Help/Usage and version information. 

-q:

 

Terminates the interactive mode and exits this command.  

-z or -zx (OpenVMS cannot use the -zx option):

 

Makes the pairevtwait command enter the interactive 

mode. The -zx option guards performing of the HORCM in the interactive mode. When this option detects 

a HORCM shut down, interactive mode terminates. 
-I[H][M][instance#] or -I[TC][SI][instance#] Specifies the command as [HORC]/[HOMRCF], and used for 

specifying instance# of HORCM. 
-g <group>:

 

Specifies a group name defined in the configuration definition file. This option must always 

be specified. The command is executed for the specified group unless the -d <pair Vol> option is specified. 
-d <pair Vol>:

 

Specifies a paired logical volume name defined in the configuration definition file. When 

this option is specified, the command is executed for the specified paired logical volumes. 
-d[g] <raw_device> [MU#]:

 

Searches a group on the configuration definition file (local instance) for the 

specified raw_device, and if the specified raw_device is contained in the group, the target volume is 

executed as the paired logical volume (-d) or group (-dg). This option is effective without specification of “-g 

<group>“ option. If the specified the raw_device is contained in two or more groups, the command is 

executed on the first group. 
-FHORC [MU#] or -FCA [MU#]:

 

Forcibly specifies a cascading TrueCopy volume for specified pair logical 

volumes on ShadowImage environment (see example in Figure 4.12). If the -l option is specified, this 

option tests status of a cascading TrueCopy volume on a local host (near site). If no -l option is specified, 

this option tests status of a cascading TrueCopy volume on a remote host (far site). The target TrueCopy 

volume must be P-VOL or SMPL. 
-FMRCF [MU#] or -FBC [MU#]:

 

Forcibly specifies a cascading ShadowImage volume for specified pair 

logical volumes on TrueCopy environment (see example in Figure 4.13). If the -l option is specified, this 

option tests status of a cascading ShadowImage volume on a local host (near site). If no -l option is 

specified, this option tests status of a cascading ShadowImage volume on a remote host (far site). The 

target ShadowImage volume must be P-VOL or SMPL. 
-d[g] <seq#> <LDEV#> [MU#]:

 

Searches a group on the configuration definition file (local instance) for 

the specified LDEV, and if the specified LDEV is contained in the group, the target volume is executed as 

the paired logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ 

option. If the specified LDEV is contained in two or more groups, the command is executed on the first 

group. The <seq #> <LDEV #> values can be specified in hexadecimal (by addition of “0x “) or decimal 

notation.  
-s <status>: ..Specifies the waiting status, which is “smpl”, “copy/rcpy”, “pair”, “psus”, or “psue/pdub”. If 

two or more statuses are specified following -s, waiting is done according to the logical OR of the specified 

statuses. This option is valid when the -nowait option is not specified.  
-ss <status>: Specifies the waiting status, which is “smpl”, “copy”(“RCPY” is included), “pair”, 

“ssus”,”psue” on SVOL.  If two or more statuses are specified following -s, waiting is done according to the 

logical OR of the specified statuses.  This option is valid when the -nowait option is not specified.  
-t <timeout> [interval]:

 

Specifies the interval of monitoring a status specified using the -s option and the 

time-out period in units of 1 sec. Unless [interval] is specified, the default value is used. This option is valid 

when the -nowait option is not specified. If <timeout> is specified more than 1999999, then “WARNING” 

message will be displayed. 
-nowait:

 

When this option is specified, the pair status at that time is reported without waiting. The pair 

status is set as a returned value for this command. When this option is specified, the -t and -s options are 

not needed. 
-nowait[s]  

When this option is specified, the pairing status on SVOL at that time is reported without waiting.  The 

pairing status is set as a returned value for this command.  

When this option is specified, the -t and -s options are not needed. 
-l: When this command cannot utilize a remote host for host down, this option executes this command by a 

local host only. The target volume of a local host must be SMPL or P-VOL. (ShadowImage volumes are 

able to specify from SVOL.) 
-nomsg:

 

Suppresses messages to be displayed when this command is executed. It is used to execute a 

command from a user program. This option must be specified at the beginning of a command argument. 

The command execution log is not affected by this option. 

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

IAC INDUSTRIES 930 Assembly Instructions Manual preview
930
Brand: IAC INDUSTRIES Pages: 8
Mercia Garden Products 05DTMBAX0307DD-V1 General Instructions Manual preview
05DTMBAX0307DD-V1
Brand: Mercia Garden Products Pages: 9
Oracle DE2-24 Customer Service Manual preview
DE2-24
Brand: Oracle Pages: 312
DataLocker IronKey EMS H350 Enterprise User Manual preview
IronKey EMS H350 Enterprise
Brand: DataLocker Pages: 23
G&T SALES Quick Framer Gambrel Roof Instructions preview
Quick Framer Gambrel Roof
Brand: G&T SALES Pages: 5
habitat et jardin Texas 938 56563 Assembly Instruction Manual preview
Texas 938 56563
Brand: habitat et jardin Pages: 17
Chieftec CEB-2355S User Manual preview
CEB-2355S
Brand: Chieftec Pages: 18
Maison Battat B. spaces Tidy Toybox Quick Start Manual preview
B. spaces Tidy Toybox
Brand: Maison Battat Pages: 2
Hama FlashPen Operating Instruction preview
FlashPen
Brand: Hama Pages: 8
Rorke Data Galaxy A16F-G2422 Installation And Hardware Reference Manual preview
Galaxy A16F-G2422
Brand: Rorke Data Pages: 108
Oracle storagetek sl150 Library Manual preview
storagetek sl150
Brand: Oracle Pages: 196
IBM DGHS-318220 Manual preview
DGHS-318220
Brand: IBM Pages: 9
Freecom DLT-V4 EZ-Kit Series Datasheet preview
DLT-V4 EZ-Kit Series
Brand: Freecom Pages: 2
Hitachi HUS151414VL3600 Quick Installation Manual preview
HUS151414VL3600
Brand: Hitachi Pages: 5
Hitachi HUS157336EL3600 Quick Installation Manual preview
HUS157336EL3600
Brand: Hitachi Pages: 4
Hitachi Hyper Scale-Out Maintaining And Troubleshooting preview
Hyper Scale-Out
Brand: Hitachi Pages: 42
Hitachi Microdrive 3K8 Quick Installation Manual preview
Microdrive 3K8
Brand: Hitachi Pages: 4
Hitachi HTS548020M9AT00 Quick Installation Manual preview
HTS548020M9AT00
Brand: Hitachi Pages: 2

Brands by name

Popular brands

Load more brands