manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

 

Hitachi Command Control Interface (CCI) User and Reference Guide 

195 

Parameter Value 

Options 

-h:

 

Displays Help/Usage and version information.  

-q:

 

Terminates the interactive mode and exits the pair volume check command.  

-z or -zx (OpenVMS cannot use the -zx option): Makes the pairvolchk command enter the interactive mode. 

The -zx option guards performing of the HORCM in the interactive mode. When this option detects a 

HORCM shut down, interactive mode terminates. 
-I[H][M][instance#] or -I[TC][SI][instance#] Specifies the command as [HORC]/[HOMRCF], and used for 

specifying instance# of HORCM. 
-g <group>:

 

Specifies the group name defined in the configuration definition file. This option must always 

be specified. The command is executed for the specified group unless the -d <pair Vol> option is specified.  
-d <pair Vol>:

 

Specifies the paired logical volume name defined in the configuration definition file. When 

this option is specified, the command is executed for the specified paired logical volumes. 
-d[g] <raw_device> [MU#]:

 

Searches a group on the configuration definition file (local instance) for the 

specified raw_device, and if the specified raw_device is contained in the group, the target volume is 

executed as the paired logical volume (-d) or group (-dg). This option is effective without specification of “-g 

<group>“ option. If the specified the raw_device is contained in two or more groups, the command is 

executed on the first group. 
-d[g] <seq#> <LDEV#> [MU#]:

 

Searches a group on the configuration definition file (local instance) for the 

specified LDEV. If specified LDEV is contained in the group, the target volume is executed as the paired 

logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option. If the 

specified LDEV is contained in two or more groups, the command is executed on the first group. The <seq 

#> <LDEV #> values can be specified in hexadecimal (by addition of “0x “) or decimal notation. 
-c:

 

Checks the conformability of the paired volumes of the local and remote hosts and reports the volume 

attribute of the remote host. If this option is not specified, the volume attribute of the local host is reported. 
-ss:

 

Used to acquire the attribute of a volume and the pair status of a volume. If this option is not specified, 

the volume attribute is reported. 
-nomsg:

 

Suppresses messages to be displayed when this command is executed. It is used to execute a 

command from a user program. This option must be specified at the beginning of a command argument. 

The command execution log is not affected by this option. 
-FHORC [MU#] or -FCA [MU#]:

 

Forcibly specifies a cascading TrueCopy volume for specified pair logical 

volumes on ShadowImage environment (see example in Figure 4.18). If no -c option is specified, this option 

acquires the attributes of a cascading TrueCopy volume on a local host (near site). If the -c option is 

specified, this option acquires the attributes of a cascading TrueCopy volume on a remote host (far site). 
-FMRCF [MU#] or -FBC [MU#]:

 

Forcibly specifies a cascading ShadowImage volume for specified pair 

logical volumes on TrueCopy environment (see example in Figure 4.19). If no -c option is specified, 

acquires the attributes of a cascading ShadowImage volume on a local host (near site). If the -c option is 

specified, acquires the attributes of a cascading ShadowImage volume on a remote host (far site). 
-MINAP: Shows the minimum active paths on specified group in HORC/HORCAsync on PVOL. 
Note: If RAID F/W will not be supporting the number of active path, then “MINAP” item will not be displayed 

as follows. 

pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC CTGID = 2] 

Display example for ShadowImage/Snapshot: 

# pairvolchk -g oradb  
pairvolchk : Volstat is P-VOL.[status = PAIR ]

 

Display example for ShadowImage (specified with “-m grp” option): 

# pairvolchk -g oradb  
pairvolchk : Volstat is P-VOL.[status = PAIR CTGID = 1]

 

Display example for TrueCopy: 

# pairvolchk -g oradb  
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA  

MINAP = 2

 ] 

Display example for TrueCopy Sync CTG:  

# pairvolchk -g oradb  
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA 

CTGID = 2 MINAP 

= 2

 ]

 

Display example for TrueCopy Async:  

# pairvolchk -g oradb  
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC 

CTGID = 2 MINAP 

= 2

 ]

 

MINAP displays the following two conditions (status) according to the pair status: 
PVOL: This shows the minimum in Active Paths on specified group in TrueCopy/TrueCopy Async  

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

Backyard Products GABLE Assembly Manual preview
GABLE
Brand: Backyard Products Pages: 72
Fishers Woodscraft Home Garden Pub Assembly Instructions Manual preview
Home Garden Pub
Brand: Fishers Woodscraft Pages: 8
Sans Digital MOBILERAID MR5S1 Quick Installation Manual preview
MOBILERAID MR5S1
Brand: Sans Digital Pages: 1
Quantum STD2401LW Installation Instructions Manual preview
STD2401LW
Brand: Quantum Pages: 88
SANHO HyperDrive COLORSPACE User Manual preview
HyperDrive COLORSPACE
Brand: SANHO Pages: 31
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Brand: Buffalo Pages: 2
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
R&S SpycerBox Cell Hardware Manual preview
SpycerBox Cell
Brand: R&S Pages: 78
IBM Cloud Object Storage System Slicestor 2212... Appliance Manual preview
Cloud Object Storage System Slicestor 2212...
Brand: IBM Pages: 50
Facom FAS.C8BK Assembly Manual preview
FAS.C8BK
Brand: Facom Pages: 2
Husky HPRO72TLOCKERBLK Use And Care Manual preview
HPRO72TLOCKERBLK
Brand: Husky Pages: 8
QNAP TS-269L TurboNAS Quick Installation Manual preview
TS-269L TurboNAS
Brand: QNAP Pages: 6
QNAP TS-230 User Manual preview
TS-230
Brand: QNAP Pages: 44
Sony MSH-128 Operating Instructions preview
MSH-128
Brand: Sony Pages: 2
Sony MSG-128A Specifications preview
MSG-128A
Brand: Sony Pages: 2
Sony MSA1GU2 - 1GB Memory Stick Micro M2 Instruction Manual preview
MSA1GU2 - 1GB Memory Stick Micro M2
Brand: Sony Pages: 2
Sony MSA-16A Operating Instructions preview
MSA-16A
Brand: Sony Pages: 2
Sony MS-MT16G Operating Instructions preview
MS-MT16G
Brand: Sony Pages: 1

Brands by name

Popular brands

Load more brands