manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, User Manual

The Hitachi TAGMASTORE MK-90RD011-25 is a cutting-edge storage solution built for reliable data management. Enhance the efficiency of your operations with this robust device. To get the most out of your experience, make sure to download the free user manual from manualshive.com for comprehensive instructions and support.

Share
Download
background image

266 

Chapter 4  Performing CCI Operations 

Parameter Value 

Options 

-h  displays Help/Usage, and version information.  
-q  terminates interactive mode and exits this command.  
-z or -zx (OpenVMS cannot use -zx option) This option makes this command enter interactive mode.  The 

-zx option prevents using HORCM in interactive mode. This option terminates interactive mode upon 

HORCM shut-down. 
-I[H][M][instance#] or -I[TC][SI][instance#] This option used for specifying the command as 

[HORC]/[HOMRCF], and used  for specifying Instance# of HORCM (refer to section 4.1.1).  
-g[s] <group> This option is used to specify a group name (defined in the configuration definition file). The 

command is executed for the specified group unless the -d <pair Vol> option shown below is specified.  
-d[s] <pair Vol> This option is used to specify a logical (named) volume (defined in the configuration 

definition file). When this option is specified, the command is executed for the specified paired logical 

volume. 
-d[g][s] <raw_device> [MU#] ...This option searches the RM configuration file (local instance) for a 

volume that matches the specified raw device. If a volume is found, the command is executed on the 

paired volume (-d) or group (-dg).This option is effective without  specification of  the “-g <group>” option. If 

the specified raw_device is listed in multiple device groups, this will apply to the first one encountered. 
-d[g][s] <seq#> <LDEV#> [MU#] This option searches the RM instance configuration file (local instance) 

for a volume that matches the specified sequence # and LDEV. If a volume is found, the command is 

executed on the paired logical volume (-d) or group (-dg).This option is effective without  specification of  

the “-g <group>” option. If the specified LDEV is listed in multiple device groups, this will apply to the first 

one encountered. <seq #> <LDEV #> can be specified in a hexadecimal (by addition of  “0x “) or decimal. 
-jp <id> (HORC/UR only)Horctakeoff command can be changed 3DC configuration from 3 DC multi-target 

to 3 DC multi-hop.In order to create 3 DC multi-hop (CA_Sync

Æ

CA_Sync/UR_PVOL

Æ

UR), it will be 

needed to specify a journal group ID for UR_PVOL. So this option is used for that purpose. If this option 

will not be specified, a journal  group ID for UR_PVOL used for 3 DC multi-target will be inherited 

automatically. 
-js <id>(HORC/UR only)Horctakeoff command can be changed 3DC configuration  from 3 DC multi-target 

to 3 DC multi-hop.In order to create 3 DC multi-hop (CA_Sync

Æ

CA_Sync/UR

Æ

UR_SVOL), it will

 be 

needed to specify  a journal  group ID for UR_SVOL. So this option is used for that purpose. If this option 

will not be specified, a journal  group ID for UR_SVOL used with 3 DC multi-target will be inherited 

automatically. The CTGID will also be inherited automatically for the internal paircreate command. 
-t <timeout>The -t <timeout> option specifies the  maximum time to wait for the Sync_PVOL to 

Sync_SVOL delta data re-synchronizing operation. It is used for the internal pairresync command with the 

time-out period in units of seconds. If this option will not be specified, the default timeout value (7200 sec) 

is used. 
 
-nomsg This option is used to suppress messages  when this command is executed from a user program. 

This option must be specified at the beginning of the command arguments. 

Returned values 

The horctakeoff command returns one of the following  values in exit (), which allows users to check the 

execution results using a user program or script. \\ Normal termination  0: \\• Abnormal termination The 

horctakeoff command returns the following error codes as well as generic error.\\Specific error code  for 

horctakeoff 

 

Category 

Error Code 

Error Message 

Value 

EX_ENQVOL 

Unmatched volume status within the group 

236 

EX_INCSTG 

Inconsistent status in group 

229 

EX_EVOLCE 

Pair Volume combination error 

235 

Volume status 
 
 
 
Unrecoverable 

EX_VOLCRE 

Local and Remote Volume currency error 

223 

Timer 
Recoverable 

EX_EWSTOT 

Timeout waiting for specified status 

233 

Summary of Contents for TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Reviews:

No comments

Related manuals for TAGMASTORE MK-90RD011-25

M-system AB2 Instruction Manual preview
AB2
Brand: M-system Pages: 3
RAID Falcon 24-Bay Installation And Hardware Reference Manual preview
Falcon 24-Bay
Brand: RAID Pages: 108
PEAKnx PNX11-10010 Getting Started preview
PNX11-10010
Brand: PEAKnx Pages: 14
Addonics Technologies AEIDMD4U2 Installation Manual preview
AEIDMD4U2
Brand: Addonics Technologies Pages: 2
Western Digital MY PASSPORT EDGE User Manual preview
MY PASSPORT EDGE
Brand: Western Digital Pages: 77
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
LaCie 12big Rack Spare Quick Install Manual preview
12big Rack Spare
Brand: LaCie Pages: 4
Seagate ST9080A Installation Manual preview
ST9080A
Brand: Seagate Pages: 20
IBM 9835-415 Deployment Manual preview
9835-415
Brand: IBM Pages: 126
kincrome Evolution K7916 Operation Manual preview
Evolution K7916
Brand: kincrome Pages: 2
Seagate Cheetah 15K.7 FC Product Manual preview
Cheetah 15K.7 FC
Brand: Seagate Pages: 90
IOGear GMD2025U Quick User Manual preview
GMD2025U
Brand: IOGear Pages: 2
IBM DGHS-318220 Manual preview
DGHS-318220
Brand: IBM Pages: 9
HOLZMANN MASCHINEN WB160L Assembly Instruction Manual preview
WB160L
Brand: HOLZMANN MASCHINEN Pages: 18
HOLZMANN MASCHINEN WT39 User Manual preview
WT39
Brand: HOLZMANN MASCHINEN Pages: 51
Garden Furniture Direct Askham Tool Store Aassembly Instructions preview
Askham Tool Store
Brand: Garden Furniture Direct Pages: 5
Sun Microsystems StorageTek System Planning Manual preview
StorageTek
Brand: Sun Microsystems Pages: 118
ZRGP PowerBase X1 Reference Manual preview
PowerBase X1
Brand: ZRGP Pages: 33

Brands by name

Popular brands

Load more brands