manualshive.com logo in svg

Hitachi RWH-4.0NFE, Installation & Operation Manual

Share
Download
Hitachi RWH-4.0NFE Installation & Operation Manual Download Page 343

ENGLISH

13.1.2.2  Removing indoor unit electrical box

!

D A N G E R

•  Disconnect the unit from the power supply before touching any of the parts in order to avoid an electrical shock.
•  Do not touch the switch for DHW tank heater operation when handling the electrical box. Keep the position of this switch in factory 

setting position (“Automatic” operation).

Switch 

(SW1)

Indicative 

label 

  



Open the electrical box cover

1 

Remove the indoor unit front cover.

2 

Unscrew the 2 front screws of the electrical box cover and then, open it.

!

C A U T I O N

Take care with the electrical box components in order to avoid damaging it.

MAINTENANCE

PMML0575 rev.2 - 03/2022

329

Summary of Contents for RWH-4.0NFE













































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands