12
安裝場所
冰箱不是用來「提昇食品新鮮度」之用，而是用來盡可能降低食品鮮度受損之用。請按照操作說明書規定正確使用， 並
請在可能會導致冰箱因熱而變色或變形狀的地毯．
榻榻米．塑膠地板上鋪設堅固的板塊。
(夏季時，地板的溫度可能會高達
50
∼
60°C
。)
若地板不夠堅固，請在地板上鋪設堅固的板塊，
否則冰箱會翻倒。
以下的場合，要將1厘米厚的結實的木板鋪在冰箱
的下面。
In the following places, place a hard board of
approximately 1cm thick under the refrigerator to cover
the whole portion of the bottom face.
A refrigerator is not something that "increases the freshness" of food. At best "a brake that some degree will slow down food going bad" is
operation manual closely and take care to use your refrigerator correctly so you can keep foods at their best.
Installation location
初次使用時
初次使用時
初次使用時
初次使用時
初次使用時
PREPARATIONS
PREPARATIONS
PREPARATIONS
The floor should be sturdy and flat.
Put some kind of sturdy boarding on the floor if the
refrigerator leans to one side, in the case of carpets that
may change color from heat exposure, or flooring and vinyl
chloride floor cover. (The temperature of the floor surface
may reach 50-60°C in summer.)
The refrigerator could incline on a flexible and fragile floor.
This will keep refrigerating power and electricity costs
down.
Direct sunlight will cause discoloration to the plastic parts
of the refrigerator.
防止降低冷卻能力，造成電力的浪費。
直射陽光也會造成部份塑料變色。
This will reduce rusting and help keep electricity costs down.
A location is not damp and has
good air flow.
防止生鏽。也防止電力的浪費。
無熱源．不直接照射陽光之處。
不潮濕．通風佳之處。
堅固．水平的地板。
A location away from direct sunlight
and heat is recommended.
達到充分冷卻時，需要
花上約 4小時。
It take about 4 hours to
fully cool down after
the power is on.
R-SF42XMH_XMS (A4).indd 12
R-SF42XMH_XMS (A4).indd 12
2/13/08 1:57:36 PM
2/13/08 1:57:36 PM
