Hitachi LM-C300 Series User Manual Download Page 81

Page: 81 / 85

- 81 -

CODE

FAULT

CAUSE

SOLUTION

0x25 Shutter closed

1. Interlock connector #1-#3 is open.
2. The shutter switch is closed. ("

〇

position)
(Shutter switch is off.)

3. The mechanical shutter is not

working. (The mechanical shutter
remains closed.)

1. Check if the interlock connector is

connected properly.

(Check if the bridge between pins #1
and #3 is closed.)

2. Check if the shutter switch position is

closed.

3. Check voltage on PIN1/2 of interlock

connector.

0x26 Laser not ready

The laser type is selected incorrectly.

2. The interlock connector is not

properly connected. (Interlock
connector #2-#4 is open.)

3. The top cover is open. (The cover

switch is off.)

4. No voltage is applied to the laser

tube.

5. The laser tube fuse is blown,
6. The laser tube does not work

normally.

1. Select the correct laser type. - For

10W, select CO2 and Type1. - For
30W, select CO2 and Type2.

2. Check if the interlock connector is

connected properly.

3. Check that the top cover is closed and

the cover SW is in proper contact.

4. Make sure that voltage is applied to the

laser tube.

5. Check if the laser tube fuse is not

blown.

6. If there is no problem with the above,

the laser tube may be damaged.
Please contact your HITACHI
distributor.

0x27 OEM shutter closed!

1. The shutter switch is closed.

(Shutter switch is off.)

2. Interlock connector #1-#3 or #2-#4 is

open.

3. The top cover is open. (Cover switch

is off.)

1. Open the shutter switch. ("|" position)

(Turn on the shutter switch.)

2. Check if the interlock connector is

connected properly.
(Check if the interlock connectors #1-
#3 and #2-#4 are closed.)

3. Check that the top cover is closed and

the cover SW is in proper contact.

0x28

YAG DC-power/MO
failure/absorber
overheat

1. Incorrect laser type selection.

1. Select the correct laser type.

- For 10W, select CO2 and Type1.
- For 30W, select CO2 and Type2.

0x30 Overspeed

1. The moving speed of the conveyor is

too fast.

2. The scanner speed is too slow.
3. The message size is too large and

there is not enough time to print
everything.

4. The space between the current print

object and the next print object is too
narrow.

5. The signal to the photocell is not sent

correctly.
(Chattering is occurring.)

1. Reduce the conveyor speed.
2. Increase the scanner speed.
3. Reduce the size of the message to be

printed.

4. Increase the space between the

current print object and the next print
object.

5. Review the photocell and its location.

0x32

File not allowed to
be printed

1. The file is damaged.
2. The file is not the laser file format.

1. Load a new message compatible with

the Laser Marker.

2. Update Scanlinux firmware.

0x33

Barcode
Parameters

1. Barcode data must be created

internally by the laser and some
barcode parameters (usually the text
to be codified) is not conform to the
barcode rules.

1. Check if the text of the field that must

be represented as a 1D or 2D code is
correct.

2. Check that the quantity of characters

of the 1D code can be represented on
the defined element.

3. Check that the quantity of characters

of the 2D code can be fitted on the
defined matrix dimensions.

Summary of Contents for LM-C300 Series






















































































Search results

Summary of Contents for LM-C300 Series

Reviews:

Related manuals for LM-C300 Series

Brands by name

Popular brands

Hitachi LM-C300 Series, User Manual

Search results

Summary of Contents for LM-C300 Series

Reviews:

Related manuals for LM-C300 Series

Brands by name

Popular brands