- 60 -
Laser Application:
To set an offset for an existing field data using Laser Application, follow the procedures below.
(1) Click the icon . Or select the "File" menu and choose the "Open" option.
(2) A list of file names will be displayed. From the list, select an existing message file with a field you
want to set the offset.
(3) Select the field to set the offset.
(4) Select the "Expiry" tab from the "Properties" menu at the bottom left of the screen to display the
offset setting menu ("Offset [days]", "Offset [minutes]").
[NOTE]
If you select the grouped text as the field you want to set the offset in step (3), the
procedures to display the offset setting menu are as follows:
- Click on the field you want to set the offset and select the "Grouped Text" tab from the
"Properties" menu at the bottom left of the screen.
- From the type list, select the element which you want to set the offset for and press
"Edit member".
- Select the "Expiry" tab from the "Properties" menu at the bottom left of the screen to
display the offset setting menu.
(5) Select the item for which you want to set the offset.
(6) Enter the offset setting value and press the "Enter" key to apply the offset value change to the
field.
[NOTE]
Depending on the application version, there may be "Apply" button at the bottom right of
the "Properties" menu. In this case, after entering the offset setting value, press "Apply"
to decide the offset value.
(7) Save the settings after completing the settings. Refer to "3.2.3 SAVING YOUR MESSAGE" for
details.
- Be sure to set the [Offset [Day]] setting in units of days, not units of months or years.
- Offset settings can be adjusted within existing fields as well as new fields.
