- 52 -
[NOTE]
If you want to move the field you just added because it overlaps an existing field, move the field
using the following procedure. If you want to delete a field, refer to "3.9.5 DELETING A FIELD".
(1) Access the field editing menu. Refer to "3.9.3 ACCESSING THE FIELD EDIT MENU".
(2) Select "GENERAL" and change the values of "Position X [mm]:" and "Position Y [mm]:".
The changed value will be reflected when the value is changed and "RETURN" is pressed.
Laser Application:
To edit or modify an existing message with Laser Application, follow the procedure below.
(1) Click on the icon . Or select the "File" menu and choose the "Open" option.
(2) A list of file names will be displayed. From the list, select the file to which you want to add a new
field.
(3) When the file is opened, select the icon on the right side of the screen.
Or select "Static figures
”
“
Text" from the menu toolbar "Draw".
(4) If you place the cursor on the position (A) where you want to add a field in the working area and
click, a text input dialogue will be displayed. (Position (A) is the position of the lower left corner)
(5) Enter the text you want. Select one from the code selection buttons (3 types: "Normal", "2 Byte
Unicode", and "1 Byte ANSI") displayed on the right side of the dialogue.
(5)
(6)
A
