- 30 -
Menu screens or configuration screens:
Some of these screens are gateways to other screens. These screens also give information about Laser
Marker configuration or about instructions that was given. For example, on Laser setup screen, the
Scanners option shows information about the Laser Marker used.
To select an option on Touch Screen, you touch the option you want to choose on screen.
Operator-entry screens:
To enter or change information of the Laser Marker, you use the operator-entry screens. For example,
on the laser setup screens, press "SETTINGS"
"DYNAMIC & PHOTOCELL"
"Mode:" to select
whether you print the stationary object or moving object.
Task screens:
You can use the task screen to create, edit or print the message. For example, at the General Window
of the Print screen, you can start and stop the marking job. You can use the Message screen to create
and modify (edit) the message.
Information screens:
If you want to know information about the Laser Marker (system status, last alarm value, etc.), you go
"Print menu"
"Alarm".
The information screen contains information about the last event occurred in the Laser Marker. This event
or alarm can be warning, a system failure, a print failure or an information event.
To close the information screen, press the "OK" button.
Most warnings refer to an event that does not prevent normal operation. You can read the information
screen and continue to use the Laser Marker, but should correct the problem as soon as possible. If you
cannot correct the problem, speak to your supervisor, or contact your local distributor.
If the event or alarm is a Print Failure, you must correct the problem immediately; you cannot continue to
use the Laser Marker.
