Hitachi LM-C300 Series User Manual Download Page 63

Page: 63 / 85

- 63 -

3.10.2. COPYING A MESSAGE (Laser Application)

This option is available only with Laser Application. To copy an existing message, follow the procedure
below.

(1) Click the icon . Or select the "File" menu and choose the "Open" option.

(2) A list of file names will be displayed. Select the message file you want to copy from the list.

(3) Right-click on the selected file name and select "Copy" from the drop-down menu. Or press

"CONTROL" + "C" on the keyboard.

(4) Then right-click and select "Paste" from the drop-down menu. Or press "CONTROL" + "V" on the

keyboard.

3.10.3. CHANGING THE NAME OF THE MESSAGE (Laser Application)

This option is available only with Laser Application. To rename an existing message file, follow the
procedure below.

(1) Click the icon . Or select the "File" menu and choose the "Open" option.

(2) A list of file names will be displayed. Select the message file you want to change the name.

(3) Right-click on the selected file name and use the drop-down menu to change the name.

(4) Enter the new name.

Another way to change the name of a message file is:

(1) Select the "File" menu and choose "Open"

(2) Select the message file you want to rename from the list.

(3) Once the message file is opened, return to the "File" menu and select the "Save As" option to

save the message file where you wish with a new name. Enter the new name and press "Save".

Summary of Contents for LM-C300 Series






















































































Search results

Summary of Contents for LM-C300 Series

Reviews:

Related manuals for LM-C300 Series

Brands by name

Popular brands

Hitachi LM-C300 Series, User Manual

Search results

Summary of Contents for LM-C300 Series

Reviews:

Related manuals for LM-C300 Series

Brands by name

Popular brands