Hitachi KP-D5000, Operation Manual

Page: 22 / 54

Digital zoom setting menu
1) Use the Up and Down buttons to move the cursor to
DIGITAL ZOOM and push the Set button. DIGITAL ZOOM
setting value blinks.
2) In this state, push the Set button to display DIGITAL ZOOM
MENU.
3) When the cursor is at MODE, push the Set button to
change the mode setting as follows.
Set button
：
OFF → ON
OFF
：
Digital zoom is not operated.
ON
：
Digital zoom is operated.
･ ･･ ･
Digital zoom magnification adjustment
Set the digital zoom to ON, to display ZOOM ADV setting item.
Move the cursor with the Up and Down buttons to ZOOM ADV
and push the Set button. WIDE TELE blinks. In this state,
Change the zoom magnification with the Up and Down buttons.
Sub menu [SUB MENU]
Sub menu is used to modify the picture quality of camera
output.
1) Press the Set button for longer than 2 seconds to display
the Main menu.
2) Use the Up and Down buttons to move the cursor to
SUB MENU and push the Set button to display SUB MENU.
37
38
◆ ◆ ◆ ◆ DIGITAL DIGITAL DIGITAL DIGITAL ZOOM ZOOM ZOOM ZOOM MENU MENU MENU MENU ◆ ◆ ◆ ◆
> > > >
M O D E M O D E M O D E M O D E ： ： ： ： O N O N O N O N
ZOOM ZOOM ZOOM ZOOM ADJ ADJ ADJ ADJ ： ： ： ： WIDE TELE WIDE TELE WIDE TELE WIDE TELE
ＲＥＴ
ＲＥＴ ＲＥＴ ＲＥＴ
ＥＮＤ
ＥＮＤ ＥＮＤ
ＥＮＤ
……
Digital zoom mode
… … Digital zoom magnification
setting
……
Return to Main menu
…… End(Menu display off ）
DEGITAL ZOOM menu
◆ ◆ ◆ ◆ ＳＵＢ ＳＵＢ ＳＵＢ ＳＵＢ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ◆ ◆ ◆ ◆
> > > >
ＬＥＮＳ
ＬＥＮＳ ＬＥＮＳ
ＬＥＮＳ ＴＹＰＥ
ＴＹＰＥ ＴＹＰＥ
ＴＹＰＥ ：ＤＣ
：ＤＣ ：ＤＣ
：ＤＣ ↵
↵ ↵
↵
ＳＹＮＣ
ＳＹＮＣ ＳＹＮＣ
ＳＹＮＣ ＭＯＤＥ
ＭＯＤＥ ＭＯＤＥ
ＭＯＤＥ ：ＩＮＴ
：ＩＮＴ ：ＩＮＴ
：ＩＮＴ
Ｈ－ＰＨＡＳＥ
Ｈ－ＰＨＡＳＥ Ｈ－ＰＨＡＳＥ
Ｈ－ＰＨＡＳＥ ：＋
：＋ ：＋
：＋０００
０００ ０００
０００
ＣＡＭ－ＲＥＳＥＴ
ＣＡＭ－ＲＥＳＥＴ ＣＡＭ－ＲＥＳＥＴ ＣＡＭ－ＲＥＳＥＴ ：ＰＵＳＨ ：ＰＵＳＨ ：ＰＵＳＨ ：ＰＵＳＨ ＳＥＴ ＳＥＴ ＳＥＴ ＳＥＴ
ＲＥＴ ＲＥＴ ＲＥＴ ＲＥＴ
ＥＮＤ
ＥＮＤ ＥＮＤ
ＥＮＤ NTSC
NTSC NTSC
NTSC Ver : XX . XX . XX
Ver : XX . XX . XX Ver : XX . XX . XX
Ver : XX . XX . XX
……
Lens type setting
…… SYNC MODE display
…… H-PHASE setting
……
Return to camera factry setting
……
Return to Main menu
……
End(Menu display off
）
SUB menu
Lens type selection
Use the Up and Down buttons to move the cursor to
LENS TYPE and push the Set button to change the setting as
follows.
Set button
：
DC→VIDEO
◆ ◆ ◆ ◆ LENS LENS LENS LENS TYPE TYPE TYPE TYPE ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ◆ ◆ ◆ ◆
>
> >
>
ＬＥＮＳ ＬＥＮＳ ＬＥＮＳ ＬＥＮＳ ＴＹＰＥ ＴＹＰＥ ＴＹＰＥ ＴＹＰＥ ：ＤＣ ：ＤＣ ：ＤＣ ：ＤＣ
ＬＥＮＳ ＬＥＮＳ ＬＥＮＳ ＬＥＮＳ ＯＰＥＮ ＯＰＥＮ ＯＰＥＮ ＯＰＥＮ ：ＯＮ ：ＯＮ ：ＯＮ ：ＯＮ
ＲＥＴ ＲＥＴ ＲＥＴ ＲＥＴ
ＥＮＤ ＥＮＤ ＥＮＤ ＥＮＤ
……
Lens type setting
…… Lens open setting
……
Return to Main menu
…… End(Menu display off ）
LENS TYPE menu
Note
1) Resolution decreses from usual image, when
using digital zoom.
2) When digital zoom is used, the light intensity
control(LIGHT CONTROL) is fixed to area near the
center of the picture(same as BLC NO.1). In addition,
white detection area is also fixed to area near the center
of the picture(same as WB NO.1). Light intensity control
and white detection area of ATW is retured to the
previous setting, when digital zoom is set to OFF.
Digital zoom
The digital zoom function uses the picture memory to
enlarge the image without using zoom lens.
Lens type setting
1) Use the Up and Down buttons to move the cursor to
LENS TYPE. LENS TYPE setting blinks.
2) In this state, push the Set button to display LENS
TYPE MENU.