Hitachi FSG Series, Technical Catalogue

Page: 366 / 424

16
/22
INSTALLATION OF OPTIONAL REMOTE CONTROLLER
16.5 INSTALLATION OF RECEIVER KIT <PC-RLH4>
The packing contains the following parts. Check the
contents and the number of parts.
Receiver
Kit
1
With
Connection
cable
Band 1
For Fixing
Cable
Screw 4
For Fixing
Receiver Kit
Screw 2
For Fixing
Clamp
PC-
RLH4
Clamp 2
For Fixing
Cable
16.5.1 INSTALLATION OF WIRELESS RECEIVER
KIT
?
NOTE:
Install the receiver kit onto the wall or ceiling near the
indoor unit.
1. Install the wireless receiver kit and indoor unit at the
same time.
2. In case that the wireless receiver kit is installed after
installing the indoor unit, turn off the power source of the
indoor unit.
3. Check to ensure that the distance between the wireless
receiver kit and the indoor unit is less than 5 m.
4. Remove the cover by using minus screw-driver.
5. Install the wireless receiver kit onto the wall or ceiling as
follows.
A. In Case of Exposing Cable
É
Fix the fixing bracket of kit by using screw (A) at 4
locations
Screw (A)
Ê
Cut one of the knockout holes at the cover.
Ë
Lead the cable through the groove and draw out the
cable from the knockout hole.
Ì
Attach the cover. Do not clamp the cable when
attaching the cover
B. In Case of Concealed Cable
É
Prepare the following box. (Field-Supplied)
JIS Box (JIS C 8336-1991)
1. Switch Box for 1 Controller (without Cover)
2. Small Switch Box for 1 Controller (without
Cover)
3. Switch Box for 1 Controller (with Cover)
§
Rigid Metal Conduit (More than Ø20)
§
Screw (M4) (Field-Supplied)
Ê
Insert the cable into the rigid metal conduit.
É
Hooking part
Fixing bracket
Cover
Ê
Click Sound
Cable