12
English
When using the Cutting blade, have the Nut cover, Left
side M10 installation nut and Counter weight set ready for
installation.
○
Nut cover (CG36DL only)
○
Left side M10 installation nut (CG36DL only)
○
Counter weight set (CG36DL only)
NOTE
For details of the operations, please see the Counter
weight set instruction manual.
Optional accessories are subject to change without notice.
APPLICATIONS
Trimming, scaling and mowing of weed.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see
Fig. 3
).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 3
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s pilot
lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in
Fig. 4
and
5
.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See
Table 1
)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1
, according to the condition of the charger or the
rechargeable battery.
CG36DAL
CG36DAL(L)
(NN)
1
Nylon head ............................................1
2
Cover ....................................................1
3
Hex. bar wrench 4 mm ..........................1
4
17×19 Combi box wrench .....................1
5
Protective glass ....................................1
6
Shoulder belt ........................................1
7
Hanger belt ...........................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold
separately)
○
Battery
(BSL3620) (BSL3626)
○
Back pack power supply
○
Cutting blade
(CG36DL
only)
(BL36200)
NOTE
For details of the operations, please see the BL36200
instruction manual.
Table 1
Indications of the pilot lamp
The
pilot lamp
lights or
blinks in
red.
Before
charging
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
While
charging
Lights
Lights continuously
Charging
complete
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Charging
impossible
Flickers
Lights for 0.1 seconds. Does not light for 0.1
seconds. (o
ff
for 0.1 seconds)
Malfunction in the
battery or the charger
The
pilot lamp
lights in
green.
Overheat
standby
Lights
Lights continuously
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).
000Book̲CG36DL.indb 12
000Book̲CG36DL.indb 12
2016/03/01 10:25:34
2016/03/01 10:25:34
