manualshive.com logo in svg

Hitachi C 12LSH, Technical Data And Service Manual

Share
Download
Hitachi C 12LSH Technical Data And Service Manual Download Page 58

--- 54 ---

11-4. Wiring Diagram

Carefully ensure that wiring is accomplished as illustrated below.  As incorrect wiring will result in lack of rotation,

reverse rotation or other malfunctions, close attention is absolutely necessary.

WARNING: Be sure to turn off the two switches (w/cover) on the top of the Monitor [260] (Model

     C 12LSH), or turn off the switch (w/cover) on the side of Handle (R) [238] (Model C 12RSH)

     and unplug the power cord plug from the receptacle before replacing the Laser Marker

     [198A] and the Switching Power Supply [233].  Do not disconnect the connector that

     connects the Laser Marker [198A] with the Switching Power Supply [233] while the Laser

     Marker [198A] is lighting.  Otherwise, the Laser Marker [198A] may be damaged due to

     surge (electricity stored in the Switching Power Supply [233]).  Do not stare into beam

     while the Laser Marker [198A] is lighting.

Fig. 67-1

   1   Wiring diagram

USA/CAN

C 12LSH

Summary of Contents for C 12LSH






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands