--- 31 ---
Fig. 40
Fig. 41
Fig. 42
Fig. 43
(3) Setting to cut crown moldings at positions and in Fig. 39 (See Fig. 44, tilt the head to the right.):
Turn the turn table to the right and set the miter angle as follows:
For 45
û
type crown moldings: 35.3
û
( mark)
For 38
û
type crown moldings: 31.6
û
( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45
û
type crown moldings: 30
û
( mark)
For 38
û
type crown moldings: 33.9
û
( mark)
Position the crown molding so that the upper surface ( in Fig. 38) contacts the fence as indicated in
Fig. 46 .
(4) Setting to cut crown moldings at positions and in Fig. 39 (See Fig. 45, tilt the head to the right.):
Turn the turn table to the left and set the miter angle as follows:
For 45
û
type crown moldings: 35.3
û
( mark)
For 38
û
type crown moldings: 31.6
û
( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45
û
type crown moldings: 30
û
( mark)
For 38
û
type crown moldings: 33.9
û
( mark)
Position the crown molding so that the lower surface ( in Fig. 38) contacts the fence as indicated in
Fig. 47.
1
4
2
3
1
2
3
A
B
1
3
2
Summary of Contents for C 12LSH
