manualshive.com logo in svg

Hitachi C 12LSH, Technical Data And Service Manual

Share
Download
Hitachi C 12LSH Technical Data And Service Manual Download Page 42

--- 38 ---

Packing (F)

Carton box

(4) How to install the top pad

Put the top pad on packing (D), packing (E) and packing (F).  Close the lids of the carton box and bind them

together (Fig. 56).

Fig. 55

Packing (E)

Sleeve

Packing (D)

(3) How to install packings (E) and (F)

Put the main body mounted with packing (B) and packing (D) in the carton box aligning with the base packing.

Cover the support at the rear of the main unit, housing and switch handle with two poly sheets.  Insert packing

(F) into the clearance near the switch handle at the front of the main unit and packing (E) into the clearance

near the support at the rear of the main unit from above.  Put the cord through the groove "A" of packing (E)

and insert the tip of the cord into the clearance "B" between the sleeve and packing (E).  (Check that cable tag

(B) is securely placed in "B" portion.)  Place the accessories in the space of packing (F) (Fig. 55).

A

Packing (F)

Cord

Fig. 56

Packing (D)

Top pad

Packing (E)

B

Summary of Contents for C 12LSH






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands