--- 41 ---
Disassembly procedure
Disassembly
spots
Item
No.
Necessary tools
1
Turn table, base
ass'y
(1) Remove the Knob Bolt
[335]
or the Tapping Screw (W/Flange)
D5 x 25 (Black)
[172]
, Guard
[336]
and Guard Holder
[337]
or the
Guard Ass'y
[176]
from Holder (A)
[145]
.
(2) Remove the two Flat Hd. Screws M6 x 25
[53]
by turning the Nylon
Nut M6
[47]
with a 10-mm wrench. Remove Plate (A)
[93]
, Sub
Fence (A)
[94A]
, Plate (B)
[48]
and Sub Fence (B)
[45A]
from
Fence (A)
[96]
and Fence (B)
[51]
.
(3) Remove the four Bolts (W/Washers) M8 x 35 (Black)
[50]
and
remove Fence (A)
[96]
and Fence (B)
[51]
from the Base Ass'y
[59]
.
(4) Remove the two Machine Screws (W/Washers) M5 x 16 (Black)
[139]
and remove the Side Cover
[140]
from the Support
[134]
.
(5) Remove the Machine Screw M4 x 12
[136]
and remove Cover (D)
[138]
from Holder (A)
[145]
.
(6) Disconnect the connector that connects Cord (B)
[168]
and Cord
(C)
[18]
.
(7) Remove the Machine Screw M4 x 12
[131]
and remove the Nylon
Clip
[133]
from Holder (A)
[145]
.
(8) Loosen the Clamp Lever
[156A]
. Holding the Grip
[174]
, pull Set
Pin (A)
[162]
forward (toward the operator) to release the right
stopper and tilt the head to the right by 45 degrees.
(9) Remove the Machine Screw (W/Washers) M5 x 16 (Black)
[65]
and
remove Knob (B)
[63]
from Holder (A)
[145]
.
NOTE: Knob (B) [63] cannot be removed unless the head is
inclined to the right by 45 degrees and the concave
portion at the rear of the Turn Table [26] is aligned with the
pinion of Knob (B) [63].
(10) Return the head to the right-angle position. Holding the Grip
[174]
, pull Set Pin (A)
[162]
backward to set the right stopper and
secure with the Clamp Lever
[156A]
.
(11) Remove the four Machine Screws M4 x 12
[1]
and remove Cover
(B)
[3]
from the rear of the Turn Table
[26]
.
(12) Disconnect the connector that connects the Encoder
[16A]
and
Cord (C)
[18]
.
(13) Remove the Machine Screw M5 x 20
[13]
and remove the
Encoder
[16A]
from the Turn Table
[26]
.
10 mm wrench
13-mm box
wrench
Phillips
screwdriver
Phillips
screwdriver
Phillips
screwdriver
Summary of Contents for C 12LSH
