manualshive.com logo in svg

Hitachi C 12LSH, Technical Data And Service Manual

Share
Download
Hitachi C 12LSH Technical Data And Service Manual Download Page 3

Page

CONTENTS

1. PRODUCT NAME ......................................................................................................................... 1

2. MARKETING OBJECTIVE ........................................................................................................... 1

3. APPLICATIONS ............................................................................................................................ 1

4. SELLING POINTS ........................................................................................................................ 2

4-1. Selling Point Descriptions ............................................................................................................ 3

5. SPECIFICATIONS ...................................................................................................................... 12

6. COMPARISONS WITH SIMILAR PRODUCTS .......................................................................... 14

7. PRECAUTIONS IN SALES PROMOTION ................................................................................. 16

7-1. Instruction Manual ..................................................................................................................... 16

7-2. Warning Labels, Warning Signs and Caution Labels ................................................................. 16

7-3. Relative Standards .................................................................................................................... 18

7-4. Laser Marker  ............................................................................................................................. 18

7-5. Ambient Illuminance and Visibility of Laser Line ........................................................................ 19

7-6.  Precautions Concerning Brake (Except for NZL) ...................................................................... 19

8. ADJUSTMENT AND OPERATIONAL PRECAUTIONS ............................................................. 20

8-1. Confirmation of Saw Blade Lower Limit Position ....................................................................... 20

8-2. Confirmation for Use of Sub Fence (A) and Sub Fence (B) ...................................................... 21

8-3. How to Use Guard ..................................................................................................................... 22

8-4. Position Adjustment of Laser Line ............................................................................................. 23

8-5. How to Use the Vise Assembly .................................................................................................. 25

8-6. Adjustment of Table Insert Position ............................................................................................ 26

8-7. Cutting Operation ....................................................................................................................... 27

8-8. Digital Display Panel (Only Model C 12LSH) ............................................................................. 34

8-9. Precautions Concerning Electronic Condition ........................................................................... 35

9. ADJUSTMENT OF COMPONENTS ........................................................................................... 36

9-1. Bevel Angle Adjustment ............................................................................................................. 36

9-2. Ball Bushing (Linear Bearing) .................................................................................................... 36

10. PACKING .................................................................................................................................. 37

11. PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY ....................................................... 39

11-1. Precautions in Disassembly and Reassembly of the Laser Marker ......................................... 39

11-2. Disassembly ............................................................................................................................. 39

11-3. Reassembly ............................................................................................................................. 53

11-4. Wiring Diagram ........................................................................................................................ 54

Summary of Contents for C 12LSH






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands