Hitachi 22LD4200, Instructions For Use Manual

Page: 22 / 38

- 21 -
Signal Out Of Range
When the PC input signal is not supported
by LCD-TFT TV, a message is displayed like
“Signal out of range” and screen is blanked.
PC MODE
Installation
• Power off both Computer and Display before
making any connections.
• Connect one end of the optional 15 pin sig-
nal cable to the 15 pin connector on the PC
and the other end to the 15 pin socket on the
TV.
3LQ0LQL'6XE&RQQHFWRU
• Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
• If you are using Windows operating system
running on a PC with a Microsoft Plug & Play
compatible video card, your system will se-
lect the appropriate timing for your monitor.
Switching from TV to PC
Press “ PC ” button to swich directly PC
mode.
Main Menu in PC mode:
Enter the main menu by pressing the “ M ”
button on the remote control.
Sound Menu
In the main menu select “Sound” using “ ”
or “ ” button then enter the Sound menu
pressing “ ”, “ ” or “
OK ” buttons.
The items in this menu are described at
Sound menu starting page 11.
6RXQG
Picture Menu
In the Main menu, select “ Picture ” using “ ”
or “ ” button, then enter the Picture menu
pressing “ ”, “ ” or “
OK ” buttons.
All adjustment in this menu except Picture
Mode is identical to adjustment defined TV
picture menu starting on page 13. Picture
Mode can be set to Auto, 4:3 and 16:9 in PC
mode.
3LFWXUH
PIP Picture
In the Main menu, select “ PIP Picture ” using
“ ” or “ ” button, then enter the PIP Picture
menu pressing “ ”, “ ” or “
OK ” buttons.
ENG-2200-1547UK-22 INCH TFT IB.p65 03.03.2004, 18:00 21