Hitachi 22LD4200, Instructions For Use Manual

Page: 20 / 38

- 19 -
0HQX
In main menu, firstly use “ ” or “ ” button
then use “ ” / “ ” or “
OK ” button to enter
Source menu. In source menu, move the
cursor by “ ” or “ ” button and then press
“
OK ” button or “ ” or “ ” buttons when the
cursor is on the required item. The selected
mode comes automatically on the screen.
79
$9
$9
$9
69,'(2
3&
Other Features
TV Status
Programme Number , Programme Name
(or AV ), (they are displayed on the upper left
of the screen) and Sleep Timer (shows the
time left on the upper right screen if en-
abled). The sound indicator and picture
mode are displayed with them too. They are
displayed after programme change for 3
seconds.
3
Programme Number
35
Programme Name (4 characters)
These OSD’s are displayed when a new
programme is entered by digit button or by
pressing “ P<P ”, “-P/CH”, “P/CH+” , “ TV ”,
“ AV ” or “ ” button.
Programme Swap (P<P)
This button is used to go to the previously
entered programme again. Pressing " P<P "
consecutively allows to swap into two last
entered programmes.
Double-digit (- / - -)
This OSD is displayed when the "Double-
Digit" button pressed in place of the pro-
gramme number indicator.
3
In order to enter a two digit programme
number you must push both numbers within
3 seconds. If the second number is not en-
tered within 3 secs the display will disap-
pear.
Personal Preferences (PP)
All the preset values will be restored, when
pressing " PP ".
33
Sound Indicator
The alternatives of the indicator are Mono,
Stereo, Dual I and Dual II. This indicator is
displayed under the programme number in-
dicator on the screen. " I-II " button is used to
select Mono or Stereo, or Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for
stereo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected
in default and also can be selected after
Dual II by Remote Control.
'XDO,,
If Dual II selected by Remote Control.
ENG-2200-1547UK-22 INCH TFT IB.p65 03.03.2004, 17:59 19