Hitachi 22LD4200, Instructions For Use Manual

Page: 15 / 38

- 14 -
3LFWXUH
Setting Colour
• Using “ ” or “ ” button select Colour.
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
3LFWXUH
Setting Sharpness
• Using “ ” or “ ” button select Sharpness.
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.
3LFWXUH
Setting Picture Mode:
• Using “ ” or “ ” button select Picture Mode.
• Press “ ” or “ ” button to set Picture Mode.
Picture Mode can be set to Auto, 4:3, 16:9,
Cinema, Subtitle, Zoom or Panorama .
3LFWXUH
Setting Noise Reduction
• Using “ ” or “ ” button select Noise Re-
duction.
• Press “ ” or “ ” button to select Noise Re-
duction level “Off” or “Minimum” or “Medium”
or “Maximum” then select “store” and press
“ ” or “ ” button to save your setting.
Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the
screen. If the menu is removed, the effect of this func-
tion is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maxi-
mum level, some picture distortions may occur. If Noise
Reduction is set to medium or minimum, the picture will
improve.
3LFWXUH
Setting Hue
(During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video
source is applied. Otherwise, HUE option is
invisible in Picture menu.):
• Using “ ” or “ ” button select Hue.
• Press “ ” button to increase hue level.
• Press “ ” button to decrease hue level.
Center value is indicated with one arrow.
ENG-2200-1547UK-22 INCH TFT IB.p65 03.03.2004, 17:59 14