Hioki PD3259-50 Instruction Manual Download

Page: 41 / 86

How to Use Voltage Sensors

Improperly affixed sensor

A voltage sensor affixed improperly will be susceptible to effects of nearby

cables, resulting in inaccurate measurement.

The insulated cable is pinched

by the tips of the

clip.

The sensor is affixed to the

insulated cable at an angle.

Insulated cable

The insulated cable is inserted

too close to the pivot point.

The sensor is affixed to two

insulated cables together, each of

which carries a voltage different

from each other.

Insulated cable

IMPORTANT

If an insulated cables under measurement are dirt or wet, the instrument

may display values lower than the actual voltages. In this case, wipe them

clean with a dry cloth before measurement.

HIOKI PD3259C961-00

Summary of Contents for PD3259-50























































































Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands

Hioki PD3259-50, Instruction Manual

Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands