Hioki PD3259-50, Instruction Manual

Page: 30 / 86

24
Installing/Replacing Batteries
2.4 Installing/Replacing Batteries
When using the instrument, insert four LR6 Alkaline batteries.
Verify that sufficient battery power remains before measurement.
If the batteries are exhausted (p. 26), replace the batteries with
fresh ones.
WARNING
• To avoid an electric shock, turn off the instrument
and remove the voltage sensors from the target
under measurement before replacing the batteries.
Do not short-circuit, recharge, disassemble the
batteries, or dispose of them in fire. Batteries may
explode if mistreated.
To prevent instrument damage or an electric shock,
use only the screws that are originally installed for
securing the battery cover in place. (M3 × 8 mm)
If you have lost any screws or find that any screws
are damaged, please contact your authorized Hioki
distributor or reseller for a replacement.
HIOKI PD3259C961-00