Hioki PD3259-50 Page 18 Instruction Manual Download

Page: 18 / 86

Operating Precautions

Handling of the cables

WARNING

To prevent an electric shock, check that the inside of

the cable is not exposed. If any color is visible from

the inside of the cable, do not use the instrument.

CAUTION

• Avoid stepping on or pinching cables, which could

damage the cables insulation.

• To prevent damage due to snapped wires, do not bend

or pull the base of the voltage sensor or cables.

The cable is hardened in freezing temperatures. Do not

bend or pull it to avoid tearing its shield or breaking cables.

Precautions when transporting the instrument

CAUTION

During shipment of the instrument, handle it carefully so

that it is not damaged due to a vibration or shock.

HIOKI PD3259C961-00

Summary of Contents for PD3259-50























































































Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands

Hioki PD3259-50, Instruction Manual

Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands