Hioki PD3259-50 Instruction Manual Download

Page: 27 / 86

Preparing for Measurement

2.1 Measurement Procedure

Before using the instrument, be sure to read “Operating

Precautions” (p. 9).

Setting up, connecting, and turning on the instrument

Insert the batteries. (p. 24)

Arrange to use other

options as needed.

Inspect the instrument before use. (p. 30)

Turn on the instrument. (p. 15)

Affix the voltage sensors. (p. 34)

Performing measurement

Perform measurement. (p. 33)

•

Measuring line-to-line voltages in a three-phase circuit (p. 37)

• Checking phase sequence in a three-phase circuit (phase sequence

detection) (p. 39)

•

Measuring the frequency (p. 41)

Freeze the measured values and phase

sequence judgment result shown on the

display. (p. 50)

Finishing measurement

Turn off the instrument. (p. 15)

2 Preparing for Measurement

HIOKI PD3259C961-00

Summary of Contents for PD3259-50























































































Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands

Hioki PD3259-50, Instruction Manual

Search results

Summary of Contents for PD3259-50

Reviews:

Related manuals for PD3259-50

Brands by name

Popular brands